So far, cubic boron arsenide has only been manufactured and tested on a laboratory scale, these products are not uniform, and more work is needed to determine if cubic boron arsenide can be made in a practical, economical form. But researchers say that in the near future, people may find some useful uses for the material, and its unique properties could make a significant difference. Read More »

Ceramic target can be divided into semiconductor related ceramic target, display ceramic target, magnetic recording ceramic target, optical recording ceramic target, superconducting ceramic target, giant magnetoresistance ceramic target and so on. Read More »

Titanium dioxide (TiO2)​, commonly known in industry, titanium dioxide, is also a typical semiconductor photocatalyst. Calcium carbonate (CaCO3) is a common inorganic nonmetal powder, widely used filler. The preparation of composite photocatalyst (CAT-CC) by supporting nano-tio2 with calcium carbonate particles as a carrier can improve the function of TiO2 by reducing the particle size and improving the particle dispersion. Read More »

Tungsten​ is a transition metal element with abundant reserve resources in the world. Tungsten-based materials are generally characterized by high inherent density (>7g·cm-3), abundant frame structure, low price and easy availability, so they have been used in the fields of electrochemistry, photocatalysis and gas sensing. Read More »

At present, the hot thermal conductive ceramic materials mainly include beryllium oxide, aluminum nitride, silicon carbide, silicon nitride, alumina and polycrystalline diamond (PCD) ceramics. Read More »

Zirconia is a new structural ceramic material developed in 1970's. Because of its wear resistance, corrosion resistance, high strength, high melting point characteristics, widely used in metallurgy, electronics, chemical, machinery and other fields. As the most important material in advanced ceramics, zirconia ceramic material is an important basic material for the development of modern high-tech industry. Read More »

Nanoparticles have the functions of high temperature resistance, high temperature resistance, high temperature resistance, high temperature resistance, oxidation resistance, good weather resistance, good weather resistance, and excellent performance. It involves two aspects of nanomaterials, which is a hot spot. It involves matter and matter. Read More »

Cadmium was discovered in 1817 by Strohmeier, a professor of chemical medicine at the University of Gottingen in Germany. In 1990, FAO and the World Health Organization divided trace elements into three categories. The first category is essential to human body, there are 8 kinds, including iodine, iron, zinc, selenium, copper, molybdenum, chromium and cobalt. Read More »

Tungsten trioxide, chemical formula: WO3, is the oxide of tungsten (VI), which is an important intermediate of tungsten industry from tungsten ore. Yellow powder, melting point: 1472℃, relative density (water =1) 7.16, boiling point 1837℃; Insoluble in water, soluble in lye, slightly soluble in acid. It can be obtained by adding acid after eumelting tungsten ore and soda. Read More »

As the lightest metal structure material, magnesium​ has broad application prospects in aerospace, automotive, high-speed rail, electronic products and medical and other fields. However, compared with traditional metal materials, magnesium has poor plasticity, difficult deformation processing of profiles and parts, and high process cost. This severely restricts the wide application of magnesium as a structural material. Read More »

In the world, people generally "alumina" is divided into two categories: metallurgical grade alumina and non-metallurgical grade alumina. Non-metallurgical grade alumina is also known as multiple varieties of alumina, chemical alumina. Among them, pseudo-boehmite, boehmite, super fine aluminum hydroxide, activated alumina, calcined alumina and corundum are all belong to the chemical alumina this category. Read More »

Titanium is a chemical element, chemical symbol Ti, atomic number 22, in the periodic table of chemical elements in the fourth period, IVB group. It is a silver-white transition metal characterized by light weight, high strength, metallic luster and resistance to wet chlorine corrosion. The most common compound of titanium is titanium dioxide​, which is used to make white pigments. In the past, titanium ore was mined mainly for titanium dioxide. Read More »

Magnesium oxide was born in 1930s as a new material. In the early days of the founding of the People's Republic of China, due to the increasing demand of rubber products for magnesium oxide, a number of small workshop factories first emerged in Shanghai, but the production variety is relatively single. Until 1956 have developed light magnesium oxide and heavy magnesium oxide two specifications of varieties. Read More »

Alumina ceramic​ is a kind of a-al2o3 based crystal structure ceramic material, because of its own high melting point, high hardness, heat resistance, corrosion resistance, electrical insulation characteristics, so it can be used in more demanding conditions. Alumina ceramics, with low price and mature production process, is one of the largest and most widely used ceramic materials, mainly used in the field of cutting tools, wear-resistant parts and bioceramics. Read More »

Titanium dioxide​ is mainly divided into three kinds: plate titanium, anatase titanium dioxide and rutile type titanium dioxide, rutile titanium dioxide, anatase titanium dioxide is two important types of titanium dioxide, currently in the market the two most widely used, but the nature of the two are very different. Read More »