So far, cubic boron arsenide has only been manufactured and tested on a laboratory scale, these products are not uniform, and more work is needed to determine if cubic boron arsenide can be made in a practical, economical form. But researchers say that in the near future, people may find some useful uses for the material, and its unique properties could make a significant difference. Read More »

Zirconia is a new structural ceramic material developed in 1970's. Because of its wear resistance, corrosion resistance, high strength, high melting point characteristics, widely used in metallurgy, electronics, chemical, machinery and other fields. As the most important material in advanced ceramics, zirconia ceramic material is an important basic material for the development of modern high-tech industry. Read More »

Tungsten trioxide, chemical formula: WO3, is the oxide of tungsten (VI), which is an important intermediate of tungsten industry from tungsten ore. Yellow powder, melting point: 1472℃, relative density (water =1) 7.16, boiling point 1837℃; Insoluble in water, soluble in lye, slightly soluble in acid. It can be obtained by adding acid after eumelting tungsten ore and soda. Read More »

In the world, people generally "alumina" is divided into two categories: metallurgical grade alumina and non-metallurgical grade alumina. Non-metallurgical grade alumina is also known as multiple varieties of alumina, chemical alumina. Among them, pseudo-boehmite, boehmite, super fine aluminum hydroxide, activated alumina, calcined alumina and corundum are all belong to the chemical alumina this category. Read More »

Titanium is a chemical element, chemical symbol Ti, atomic number 22, in the periodic table of chemical elements in the fourth period, IVB group. It is a silver-white transition metal characterized by light weight, high strength, metallic luster and resistance to wet chlorine corrosion. The most common compound of titanium is titanium dioxide​, which is used to make white pigments. In the past, titanium ore was mined mainly for titanium dioxide. Read More »

Alumina ceramic​ is a kind of a-al2o3 based crystal structure ceramic material, because of its own high melting point, high hardness, heat resistance, corrosion resistance, electrical insulation characteristics, so it can be used in more demanding conditions. Alumina ceramics, with low price and mature production process, is one of the largest and most widely used ceramic materials, mainly used in the field of cutting tools, wear-resistant parts and bioceramics. Read More »

Quartz is one of the most common minerals in nature. It is the scientific name of a group of minerals composed of silica​ (SiO2). It is widely used in glass, architecture, precious jade and stone decoration and other traditional industries. Since the 1960s, computer, new materials, new energy and other emerging technologies have put forward higher requirements on the purity of quartz products, and the concept of high purity quartz was born. Read More »

A transparent metal, indium tin oxide​ (ITO), is an alloy made from a mixture of 90% In₂O₃ and 10% SnO₂. It presents as a clear, tawny film or yellowish-gray mass that is both transparent and electrically conductive. Therefore, it is mainly used for making LIQUID crystal display, flat screen, plasma screen, touch screen, organic light-emitting diode, solar panel, antistatic coating, EMI shielding transparent conduction film, as well as various optical coatings, etc. Read More »

Nanomaterials are materials with sizes between 0.1 and 100 nanometers in at least one dimension (e.g., length (x), width (y), height (z)), such as graphene, fullerene C60, carbon nanotubes, silver nanowire, silicon dioxide nanowire, molybdenum disulfide, etc. Nanomaterials are divided into zero-dimensional, one-dimensional and two-dimensional nanomaterials. Read More »

Optical Crystal is a kind of Crystal material used for Optical medium materials. It is widely used in making window pieces, lenses and prisms in various fields of ULTRAVIOLET and infrared application. According to the crystal structure is divided into single crystal and polycrystal. Single crystal materials have high crystal integrity and light transmittance, as well as low input loss, so common optical crystals are dominated by single crystal. Read More »

Light magnesium oxide​ is a very widely used product, and the production process of light magnesium oxide is very environmentally friendly, the more advanced domestic production process of light magnesium oxide is generally as follows: 1. Light magnesium oxide is calcined in a traditional rotary calcination kiln with magnesium hydroxide as the main raw material; Read More »

Titanium dioxide ​(TiO2) is a hard and chemically resistant white titanium oxide. Titanium dioxide (TiO2) sputtering target can be used to obtain high quality titanium dioxide thin film, which has been widely used in various applications due to its coating characteristics. Titanium dioxide film provides opacity and durability while helping to ensure paint life and paint surface protection. Read More »

Bismuth (III) oxide is an important compound of Bismuth, Bismuth oxide has two kinds of crystal structure: Alpha type and Beta type. Compared with beta Bismuth oxide, alpha Bismuth oxide is more stable in high temperature and has more common use of electronic materials, thermistor, glass coloring, v Read More »

Indium-Tin Oxide (ITO) has been widely used as transparent conducting material for various display devices. Whereas this material has some problems, such as the conductivity and the flexibility. High conductivity is required for responsivity when the panel size becomes larger. Flexibility is require Read More »

AZO sputtering target, or aluminum-doped zinc oxide target, contains the element of Al, Zn and O.Purity: 99%, 99.9%, 99.99%.Circular: Diameter <= 14 inch, Thickness>= 1 mm;Block: Length <= 32 inch, Width <= 12 inch, Thickness>= 1 mm.High Purity AZO sputtering targets are available in various forms Read More »