News

• Metal powder can be used for 3D printing

  Titanium alloy, aluminum alloy, stainless steel, there are a lot of metal powder materials that can be used for 3D printing. There are four kinds of printing consumables widely used in 3D printing: liquid photosensitive resin material, thin material, low melting point silk material and powder material.

  News January 10, 2022
• What are rare earth magnets?

  Magnetic material and magnetic material are one meaning, but the name is not the same! Rare earth permanent magnet material is a kind of magnetic material made of samarium, neodymium mixed rare earth metal and transition metal (such as cobalt, iron, etc.) alloy by powder metallurgy pressing sintering, magnetized by magnetic field.

  News January 07, 2022
• Lithium battery materials' development trend

  In terms of power lithium battery, in terms of passenger cars, foreign countries take modified lithium manganate and ternary lithium battery as the main materials. In China, lithium iron phosphate is mainly used as the main material, but due to the low energy density of lithium iron phosphate, the current trend to ternary lithium battery.

  News January 06, 2022
• High temperature alloy powder's categories

  The use temperature of high temperature alloy powder of general quality is mainly in the range of one hundred degrees Celsius to nine hundred degrees Celsius, but because of the different elements in the alloy powder, there is a certain gap in the performance. Elements such as nickel in iron based high temperature alloy powder make it suitable for moderate temperature use.

  News January 05, 2022
• Target material's making method, classification and application

  At present, the target materials are mainly prepared by casting and powder metallurgy. 1. Casting method: the alloy raw material with a certain composition ratio is melted, and then the alloy solution is poured into the mold to form ingot, and finally the target is made by mechanical processing, and the casting method is melted and cast in vacuum.

  News January 04, 2022
• Titanium dioxide is non-toxic or causes cancer-which is true?

  On February 18, the European Commission finally classified inhalable titanium dioxide as a category 2 suspected carcinogen, based on a 2017 proposal. Titanium dioxide, a major player in the field of physical sun protection, is favored by Brands such as ANESSA, FANCL, Citino Doctor, Estine and Kiehl's. Is titanium dioxide really a carcinogen? Titanium dioxide sunscreen for years!

  News January 03, 2022
• Hexagonal boron nitride's structure and performance

  Hexagonal boron nitride (H - BN), is a kind of white powder material, its crystal structure and graphite are very similar, and both the physical and chemical properties are similar, so the hexagonal boron nitride is also referred to as "white graphite", in the heat conduction, lubrication, hydrogen storage, battery diaphragm material, high temperature oxidation resistance coating, catalysis, etc all have important applications.

  News December 31, 2021
• What are the main uses of rare earth?

  Some rare earth elements have single electron orbitals and large magnetic moments. Permanent magnet materials: the first-generation Ndfeb magnet Nd2Fe14B, the third-generation Samarium iron-nitrogen magnet (Sm2Fe14Nx). Used in computer, new energy vehicles, wind power, energy-saving home appliances and other fields.

  News December 28, 2021
• Sputtering target material: semiconductor chip material king

  In the chip industry with high technology, sputtering target is a necessary raw material for vlSI manufacturing. Which makes use of the ion, ion source through accelerating gathered in the high vacuum, and the formation of a high speed can ion beam, the bombardment of solid surface, ions and solid surface atomic momentum exchange.

  News December 27, 2021
• Nickel base alloy powder-how many kinds of it?

  Nickel-chromium alloy thermal spraying powder: there are more kinds of thermal spraying powder, such as nickel-chromium heat resistant alloy, which is made by adding 20% chromium in nickel. Nickel-chromium heat-resistant alloy hardly oxidizes at high temperature. It is a typical coating material with heat resistance, corrosion resistance and high temperature oxidation resistance.

  News December 30, 2021