News

• Learn neodymium oxide powder basics and application

  Neodymium oxide, also known as neodymium trioxide in Chinese, Nd₂O₃, CAS is 1313-97-9 a metal oxide. It is insoluble in water and soluble in acid.

  News August 04, 2022
• Hit has made important progress in ultra-high toughness nano-ceramics

  In this study, the internal microstructure of powders can be controlled at micro and nano scale during the rapid cooling process of ceramic melt, and the geometric characteristics of grains can be controlled during powder sintering process, which provides a new technical principle for the development of ultra-high toughness nano-ceramics.

  News August 03, 2022
• Tin-based materials applied to lithium anode

  Due to its high specific capacity, moderate lithium deposition voltage, abundant natural reserves, low price, high safety and environmental protection, tin-based materials​ have attracted the attention of researchers and are regarded as one of the next generation of ideal lithium anode materials.

  News August 02, 2022
• Lithium ferromanganese phosphate advantage & disadvantage of adding manganese

  In this context, lithium ferromanganese phosphate (LMFP), as an upgraded replacement material for lithium iron phosphate, has attracted much attention in the market.

  News August 01, 2022
• Guide to quartz glass application in optical field

  Quartz glass is a special industrial technology glass composed of silica single component, with a series of special physical and chemical properties, and is known as the "king of glass" by experts in the field of new materials.

  News July 29, 2022
• Learn lithium sulfur battery research status and progress

  Compared with the traditional lithium ion battery, the theoretical energy density of lithium sulfur battery​ can reach 2680Wh/kg at the average voltage of 2.15V, which is about 6 times of the energy density of the current lithium ion battery. Therefore, it is considered as one of the most potential systems to replace the traditional lithium ion battery.

  News July 28, 2022
• What's the best semiconductor material?

  So far, cubic boron arsenide has only been manufactured and tested on a laboratory scale, these products are not uniform, and more work is needed to determine if cubic boron arsenide can be made in a practical, economical form. But researchers say that in the near future, people may find some useful uses for the material, and its unique properties could make a significant difference.

  News July 27, 2022
• What is cadmium telluride?

  Cadmium telluride (CdTe) is an important group ⅱ-ⅵ compound semiconductor material with black crystalline particles or powders, melting point of 1092℃, relative molecular weight of 240, crystal structure of sphalerite type, with direct transition type band structure. The lattice constant is 0.6481nm, the bandgap width is 1.45eV, the electron mobility at room temperature is 1050 C ㎡/(Vs), and the hole mobility at room temperature is 80 C ㎡/(Vs).

  News July 26, 2022
• Top five alloy sputtering target common preparation methods

  Alloy sputtering target has higher requirements than other materials. In addition to general requirements such as purity, size, impurity content and defect control, there are also special requirements such as surface roughness, composition and tissue uniformity, impurity (oxide) content and size.

  News July 25, 2022
• Learn details of 17 rare earth elements application analysis

  There are 17 elements in total, known as rare earth elements, including lanthanum​ (La), cerium (Ce), praseodymium (Pr), neodymium (Nd), promethium (Pm), samarium (Sm), europium (Eu), gadolinium (Gd), terbium (Tb), dysprosium (Dy), holmium (Ho), erbium (Er), thulium (Tm), ytterbium (Yb), lutetium (Lu) and scandium (Sc) and yttrium (Y), which are closely related to 15 elements in the lanthanide series.

  News July 22, 2022