News

• Manganese powder ingredients - What is manganese powder made of?

  In the iron and steel industry, manganese is mainly used for steel desulfurization and deoxidation. It is also used as an alloy additive to improve the strength, hardness, elastic limit, wear resistance and corrosion resistance of steel.

  News August 18, 2022
• How is indium used in indium bonding?

  Using indium binding target material to avoid when the sputtering target material loss, the need to control a certain amount of sputtering power, but in the process of sputtering target materials sputtering power is one of the major influential factors of film-forming rate.

  News August 17, 2022
• Germanium telluride - What is it? How does it work?

  Germanium telluride toxicological data main irritating effects on the skin skin and mucous membranes on the eyes effect of irritation Sensitization

  News August 16, 2022
• Aluminum telluride uses, applications & benefits

  At high temperatures, aluminum vapor reacts with gaseous tellurium to form gaseous molecules that exist only transiently, Al2Te2, AlTe2. Only Al2Te3 is stable at room temperature. It can be prepared by reaction of appropriate proportion of component elements at high temperature. The conditions were 1000℃ and 1H.

  News August 15, 2022
• Manganese telluride - What is it? How does it work?

  Manganese telluride (MnTe) is a hot material. The quasi-reluctance in Manganese telluride (MnTe) extends to very high temperatures and produces a thermoelectric potential much stronger than that generated by electron charges alone. Thermoelectric materials convert heat directly into electricity without emitting toxic gases or requiring moving parts.

  News August 12, 2022
• Indium powder - what is it? How to make it?

  Indium occupies an important position in the scattered metals. It is mainly used in the manufacture of III-V semiconductors, cathode ray phosphors, mercury-free zinc powders, transparent conductive films and other electronic and battery materials. In addition, indium alloys and indium coatings are also widely used in industry.

  News August 11, 2022
• What is germanium powder?

  High-purity germanium is a semiconductor material used in the manufacture of semiconductor devices. The germanium single crystal doped with a small amount of specific impurities can be used to make various transistors, rectifiers and other devices. High-purity germanium single crystal has a high refractive index.

  News August 10, 2022
• Cadmium zinc telluride: a new material for solar cells

  Cadmium zinc telluride, also called CdZnTe, abbreviated as CZT. CZT crystal is a wide band gap II-VI compound semiconductor, which can be regarded as solid solution of CdTe and ZnTe. The melting point varies between 1092 and 1295 degrees Celsius depending on the amount of Zn added.

  News August 09, 2022
• Antimony tellurides are used for the production of high-purity semiconductors

  Sb2Te3 is a main material with basic functions, and its thermoelectricity is applied as a new energy source such as solar energy on the basis of doping properties and solid-state phase transition properties are used as key materials for publicity.

  News August 08, 2022
• Introduction to polycrystalline silicon basics and development

  Polysilicon is an electronic material with industrial silicon as raw material and purified by a series of physical and chemical reactions. It is the main raw material of silicon polishing sheet, solar cell and high purity silicon products.

  News August 05, 2022