Article List
- What is magnesium chloride used for?Magnesium chloride is an important inorganic raw material in the chemical industry. It is a colorless flaky crystal, slightly soluble in acetone, soluble in water, ethanol, methanol, and pyridine. It deliquesces and smokes in humid air, and sublimes when it is white hot in the hydrogen gas stream, and can form hexahydrate.News April 12, 2023
- How does chromium oxide improve the properties of stainless steel?Among the ingredients of stainless steel, chromium is the most important element. Chromium is a very active element that can form a layer of dense chromium oxide film (Cr2O3) on the surface, which has a very good protective effect especially in extremely bad/acidic environments, and can well prevent further damage to the substrate.News April 11, 2023
- How to make aluminum powder without a ball mill?Metallic aluminum powder is a large category of metallic pigments due to its wide application, large demand, and many varieties. The aluminum powder particles used in pigments are scaly, and it is precisely because of this scaly particle state that aluminum powder has metallic luster and shielding functions.News April 10, 2023
- What is the use for Silicon dioxide?Fumed silica is one of the extremely important high-tech ultra-fine inorganic new materials. Because of its small particle size, it has large specific surface area, strong surface adsorption force, large surface energy, high chemical purity, good dispersion performance, thermal resistance, Resistance and other aspects have specific properties.News March 31, 2023
- Niobium pentoxide target：Properties, Applications, and BenefitsNiobium pentoxide, chemical formula Nb2O5, turns yellow when heated to 400°C, soluble in hydrofluoric acid, hot sulfuric acid and alkali, insoluble in water and is the most stable oxide. The chemical formula of its hydrate is Nb2O5 xH2O, which can be decomposed by heat, soluble in concentrated sulfuric acid, concentrated hydrochloric acid, hydrofluoric acid and strong alkali, insoluble in water and ammonia.News March 30, 2023
- PVD coating colors corresponding to various target materialsSelect the target type, material and gas (nitrogen, oxygen, acetylene, methane, etc.), determine the target and gas type, and then adjust the gas ratio, dosage, sputtering power, sputtering time, substrate processing temperature, sputtering temperature , sputtering time and other process parameters to prepare a color film layer, which is widely used in the decorative coating industry.News March 29, 2023
- How to Choose the Right Chromium Granules for Your NeedsChromium is a sublimation material. When evaporated in a vacuum, the surface is very easy to oxidize. If an oxide film is formed, it is not easy to evaporate from the surface. Therefore, sometimes chromium is electroplated on a tungsten wire as thick as possible, and then in a vacuum The tungsten wire is heated to evaporate the chromium.News March 28, 2023
- Aluminum Sputtering Targets: Properties, Applications, and BenefitsThe aluminum target is one of the sputtering targets used in the vacuum coating industry. It is a product of high-purity aluminum after a series of processing. It has a specific size and shape. The high-purity aluminum material is installed on a vacuum coating machine and sputtered into a film.News March 27, 2023
- What is titanium target in sputtering?Titanium metal and titanium sputtering target are basically the same, and both are composed of titanium element. The difference is that titanium metal is more like raw materials, while titanium targets are more like titanium products.News March 24, 2023
- What's zirconium oxide?The chemical formula of zirconium dioxide is ZrO2, which is the main oxide of zirconium. It is usually a white, odorless and tasteless crystal, which is difficult to bathe in water, hydrochloric acid and dilute sulfuric acid.News March 23, 2023