Article List
- How to fix a damaged sputtering target?When our target is damaged, there are two situations. If there is only a slight crack, we can bond the target to the back plate so it can be keep up used; if the damage is serious, the target will not be used, and we need to rework one. If it is "target poisoning", we can use an intermediate frequency source or radio frequency source to beat the target for an hour or two, then take out the target, polish it with sandpaper, remove the surface pollutants, and it will be restored.News May 10, 2023
- Tungsten wire meshTungsten wire mesh is a pure tungsten wire product with high melting point, high hardness, high strength, high resistivity, low vapor pressure, low evaporation rate, good high temperature resistance (can withstand high temperature of 3400 degrees), and excellent impact resistance, so it is widely used in various mechanical equipment.News April 28, 2023
- What is nickel carbonate?Nickel carbonate is a mixture of one or several inorganic compounds containing nickel and carbonate. The most industrially important form of nickel carbonate is alkali nickel carbonate, with the chemical formula Ni4CO3(OH)6(H2O)4.News April 27, 2023
- How does yttria stabilized zirconia?In conclusion, yttrium oxide stabilized zirconia is widely used in various fields as a high performance engineering ceramic material with excellent characteristics such as wear resistance, corrosion resistance and high temperature stability.News April 26, 2023
- The ferrous chloride: Properties and ApplicationsFerrous chloride is an inorganic substance with the chemical formula FeCl2. green to yellow in color. It is soluble in water, ethanol and methanol. There is the tetrahydrate FeCl2-4H2O, which is a transparent blue-green monoclinic crystal.News April 25, 2023
- The Science Behind Bismuth Vanadate: Properties and ApplicationsBismuth vanadate is a bright yellow inorganic chemical, it does not contain heavy metal elements that are harmful to human body, it is an environmentally friendly low carbon metal oxidation substance.News April 24, 2023
- Which processes can be used to make nano powders?Nanopowder, also known as ultrafine powder or ultrafine powder, generally refers to powder or particles with a particle size below 100nm. It is a solid particle material in an intermediate state between atoms, molecules and macroscopic objects. It has a specific surface Effect, small size effect, volume effect, quantum size effect and macroscopic quantum tunneling effect are widely used.News April 14, 2023
- Molybdenum silicide usesMolybdenum silicide has high melting point, low density, good thermal conductivity and good electrical conductivity as well as excellent high temperature oxidation resistance, high elastic modulus, low thermal expansion coefficient, high strength, chemical corrosion resistance and good thermal shock resistance.News April 13, 2023
- What is magnesium chloride used for?Magnesium chloride is an important inorganic raw material in the chemical industry. It is a colorless flaky crystal, slightly soluble in acetone, soluble in water, ethanol, methanol, and pyridine. It deliquesces and smokes in humid air, and sublimes when it is white hot in the hydrogen gas stream, and can form hexahydrate.News April 12, 2023
- How does chromium oxide improve the properties of stainless steel?Among the ingredients of stainless steel, chromium is the most important element. Chromium is a very active element that can form a layer of dense chromium oxide film (Cr2O3) on the surface, which has a very good protective effect especially in extremely bad/acidic environments, and can well prevent further damage to the substrate.News April 11, 2023